Menu
Your Cart

Lobe piercing

Diagram: Lobe piercingThe earlobe is soft tissue without cartilage, so it is the fastest zone: 6–8 weeks of healing against 4–12 months in cartilage. It is where people start, and it is the easiest place to wear heavier dangles.

Which shape fits for the lobe

Each name opens exactly those.

Titanium or steel for the lobe

The material decides how the piercing heals.

Ready-made selections

Already filtered by one parameter.

Other ear zones

What goes into the lobe

The classic is a labret with a flat disc at the back: it does not catch on the pillow and does not press during sleep. A length of 6–8 mm covers most cases. For a healed piercing studs, barbells and rings all work too.

Thickness

The lobe standard is 1.0–1.2 mm. Piercing-gun earrings are often thicker and blunter, which is why the piercing heals longer. If the channel has already formed, go by the thickness of the jewellery you wore last.

Second and third piercing

The lobe takes several piercings in a row — the simplest way to build a composition without painful cartilage. For the upper piercings take shorter bars, because the tissue there is thinner.

Size and material

MaterialTitanium25 models. Contains no nickel, so it causes no reaction even in a fresh piercing. Lighter than steel — less load on the tissue. The material of first choice.
316L steel12 models. Cheaper, corrosion-resistant, suitable for a healed piercing. For the first jewellery titanium is the better choice.
Thickness1.2 mm — 26 models, 1 mm — 5 models, 0.8 mm — 3 models. The thickness must match the one the piercing was made with.
Bar length6 mm — 23 models, 8 mm — 20 models, 10 mm — 12 models, 12 mm — 7 models. A longer bar is needed while the swelling lasts, a shorter one — for a healed piercing.
Ring diameter8 mm — 15 models, 10 mm — 11 models, 6 mm — 7 models, 9 mm — 5 models. A smaller diameter sits tighter, a bigger one — looser and more visible.
ThreadInternal — 17 models, Threadless — 15 models, External — 3 models. An internal thread is hidden inside the bar — it does not scratch the channel when changing.
InsertCubic zirconia — 14 models, None — 10 models, Synthetic opal — 2 models.

FAQ

Which size should I choose?

The typical size for this zone is 1 mm thick. Jewellery smaller than needed presses on the channel, bigger — catches on clothes and hair. The exact size of each model is given on its page.

How long does an earlobe piercing take to heal?

The lobe heals in 6–8 weeks — faster than any other ear zone. But changing the jewellery earlier than a month is still not worth it.

Why is titanium better than steel?

Titanium is about half the weight and contains no nickel. 316L steel is also fit for wearing, but there is nickel in it, and people sensitive to nickel feel it. For a fresh piercing titanium is the safer choice.

Can titanium be worn all the time?

Yes. Titanium does not oxidise in contact with lymph and does not change colour, so it is not taken off at night or in the shower. The jewellery is worth removing only for cleaning — and only from a healed piercing: a fresh channel is not left empty.

Labret earring LSI47-2 – jewelry for piercing lips, ear, cartilage, helix, tragus, concha, medusa, Monroe, Madonna (1 pc) Labret earring LSI47-2 – jewelry for piercing lips, ear, cartilage, helix, tragus, concha, medusa, Monroe, Madonna (1 pc)
Hot
16GA (1.2mm) · 14"(6mm)/516"(8mm)
Лабрет
Description: The original labret earring "Iridium Shine" LSI47-2 is a universal decoration that is ideal for various types of piercing. Thanks to high-quality stainless steel and bright cubic zirconia, the product is not only safe for the skin, but will also become a stylish accent in your image. Ma..
275 ₴
Ex Tax:275 ₴ per pc
Labret earring made of steel with cluster wrap and cubic zirconia PF LSIL0122 for piercing cartilage of the ear, helix, tragus, lips (Monroe, Medusa) (1 pc) Labret earring made of steel with cluster wrap and cubic zirconia PF LSIL0122 for piercing cartilage of the ear, helix, tragus, lips (Monroe, Medusa) (1 pc)
Hot
16GA (1.2mm) · 14"(6mm)/516"(8mm)
Лабрет
Figured labret with bright sparkling cubic zirconia. The barbell is suitable for ear piercing (helix, tragus) or lip piercing (Madonna, Monroe, Medusa, Angel Bite, Spider Bite and other piercings). Earring with internal thread and durable color IP coating. The barbell is made of surgical (medical, s..
350 ₴
Ex Tax:350 ₴ per pc
Labret earring made of titanium for lip piercing, ear cartilage PiercedFish T23L02 with a spike (1 pc) Labret earring made of titanium for lip piercing, ear cartilage PiercedFish T23L02 with a spike (1 pc)
Hot
16GA (1.2mm) · 12"(12mm)/14"(6mm)/38"(10mm)/516"(8mm)
Лабрет
..
280 ₴
Ex Tax:280 ₴ per pc
Labret earring with steel spike for mouth or ear piercing PF LS02 (1 pc) Labret earring with steel spike for mouth or ear piercing PF LS02 (1 pc)
Hot
16GA (1.2mm) · 14"(6mm)/38"(10mm)/516"(8mm)
Лабрет
..
250 ₴
Ex Tax:250 ₴ per pc
Steel clicker ring PiercedFish PC3/RH3 earring for piercing septum, tragus and helix, eyebrows, lips, nipples, navel (from 6 mm to 16 mm) (1 pc) Steel clicker ring PiercedFish PC3/RH3 earring for piercing septum, tragus and helix, eyebrows, lips, nipples, navel (from 6 mm to 16 mm) (1 pc)
Hot
14GA (1.6mm)/16GA (1.2mm)/18GA (1mm)/20GA (0.8mm) · 12"(12mm)/14"(6mm)/38"(10mm)/58"(16mm)…
Клікер
..
215 ₴
Ex Tax:215 ₴ per pc
Steel labret earring with a cluster-shaped three-petal flower with cubic zirconia PF LSIL01-LP3 for piercing the ear cartilage, helix, tragus. (1 pc) Steel labret earring with a cluster-shaped three-petal flower with cubic zirconia PF LSIL01-LP3 for piercing the ear cartilage, helix, tragus. (1 pc)
Hot
16GA (1.2mm) · 14"(6mm)/516"(8mm)
Лабрет
Labret Earrings PF LSIL01-LP3 – An Elegant Addition to Your Piercing We present to your attention stylish labret earrings, created for those who value originality and high quality. Made of medical steel, these earrings are equipped with a cluster-shaped winding in the form of three flower petals, de..
350 ₴
Ex Tax:350 ₴ per pc
Steel labret earring with a cluster-shaped twist in the shape of two flower petals with cubic zirconia PF LSIL01-LP for piercing the cartilage of the ear, helix, tragus. (1 pc) Steel labret earring with a cluster-shaped twist in the shape of two flower petals with cubic zirconia PF LSIL01-LP for piercing the cartilage of the ear, helix, tragus. (1 pc)
Hot
16GA (1.2mm) · 14"(6mm)/516"(8mm)
Лабрет
A shaped labret with bright sparkling cubic zirconia is the perfect decoration for your piercing! This exclusive labret is made for the bold and stylish – it is perfect for ear (helix, tragus) and lip piercings (Madonna, Monroe, Medusa, Angel Bite, Spider Bite and other popular options). The product..
350 ₴
Ex Tax:350 ₴ per pc
Steel labret earring with flower-shaped cluster wrap with cubic zirconia PF LSIL01-K for piercing ear cartilage, helix, tragus. (1 pc) Steel labret earring with flower-shaped cluster wrap with cubic zirconia PF LSIL01-K for piercing ear cartilage, helix, tragus. (1 pc)
Hot
16GA (1.2mm) · 14"(6mm)/516"(8mm)
Лабрет
Labret Earring PF LSIL01-K – Elegant Piercing Jewelry We present to your attention a stylish labret earring PF LSIL01-K, created for those who value modern design and high quality. Made of stainless steel, it is equipped with a cluster-shaped flower-shaped winding, decorated with bright cubic zircon..
350 ₴
Ex Tax:350 ₴ per pc
Titanium clicker ring PiercedFish RHT4 earring for septum, tragus and helix piercings, eyebrows, lips, navel (from 6 mm to 10 mm) (1 pc) Titanium clicker ring PiercedFish RHT4 earring for septum, tragus and helix piercings, eyebrows, lips, navel (from 6 mm to 10 mm) (1 pc)
Hot
16GA (1.2mm)/18GA (1mm) · 12"(12mm)/14"(6mm)/38"(10mm)/516"(8mm)
Клікер
..
325 ₴
Ex Tax:325 ₴ per pc
Titanium labret earring for ear (helix, tragus, conch piercing), lip PiercedFish T23L (1 pc) Titanium labret earring for ear (helix, tragus, conch piercing), lip PiercedFish T23L (1 pc)
Hot
16GA (1.2mm) · 12"(12mm)/14"(6mm)/38"(10mm)/516"(8mm)
Лабрет
..
285 ₴
Ex Tax:285 ₴ per pc
Titanium labret earring for ear and lip piercing PiercedFish TIL03 with crystal (1 pc) Titanium labret earring for ear and lip piercing PiercedFish TIL03 with crystal (1 pc)
Hot
16GA (1.2mm) · 14"(6mm)/38"(10mm)/516"(8mm)
Лабрет
..
340 ₴
Ex Tax:340 ₴ per pc
Titanium labret earring for ear, lip, nose piercing PiercedFish TIL (1 pc) Titanium labret earring for ear, lip, nose piercing PiercedFish TIL (1 pc)
Hot
16GA (1.2mm) · 12"(12mm)/14"(6mm)/38"(10mm)/516"(8mm)
Лабрет
..
320 ₴
Ex Tax:320 ₴ per pc
Titanium Microlabret Heart Earring with Cubic Zirconia for Lip, Helix, Tragus Piercing PF T23LI3-2 (1 pc) Titanium Microlabret Heart Earring with Cubic Zirconia for Lip, Helix, Tragus Piercing PF T23LI3-2 (1 pc)
Hot
16GA (1.2mm) · 14"(6mm)/38"(10mm)/516"(8mm)
Мікролабрет
Titanium micro labret with internal thread and transparent round cubic zirconia. The earring is suitable for various types of lip piercing (lower, upper, Monroe, Medusa, Angel Bite, Spider Bite and others) or pierced ear cartilage (piercing in helix or tragus). Titanium labrets are very light and sa..
360 ₴
Ex Tax:360 ₴ per pc
Кольцо кликер из титана Pirslab RHT70-STC серьга сердце для пирсинга септума, трагуса и хеликса, губ, сосков (1 pc) Кольцо кликер из титана Pirslab RHT70-STC серьга сердце для пирсинга септума, трагуса и хеликса, губ, сосков (1 pc)
New Hot
38"(10mm)/516"(8mm)
Клікер
Кольцо кликер в виде сердца для пирсинга. Выполнено из биосовместимого гипоаллергенного титанового сплава Ti 6Al-4V ELI (ASTM F136). Необычная модель из титана в форме овала с дорожкой фианитов. Может использоваться для украшения прокола носа септум, хряща ушей: трагус, хеликс. Красивое украшение дл..
470 ₴
Ex Tax:470 ₴ per pc
Showing 1 to 35 of 49 (2 Pages)